SOFT TRIPLE FOLD TONNEAU COVER

1.Your truck bed length is determined bythe distance between the inside of your tailgate and the inside of the bulkhead.When you measure truck bed length you may find that the exact number does not match any lengths listed on our product pages. That's because most truck and accessory companies round off their mea-surements to the nearest half-foot.So,if your truck bed measures 76",you can go with the product listed for a 6.5-foot bed.

2.Got out the tape measure and now youa have the length of your bed in inches. Find your truck's make and model in the guide below and match up your mea-surement with the advertised lengthand name of your particular truck bed.

3.Remember: your tape measure may be at a slight angle which could alter the measurement you end up with. It's best to think of your measurement as an approximation,and match it up with the nearest bed length.

CHEVROLETSERIES

Definition: A protective cover plate made of multiple rigid hard panels (steel plate, aluminum alloy, fiberglass, carbon fiber, etc.) hinged together and foldable inward/sideways for storage, used to close the engine compartment opening; Different from soft tarpaulins, the cover itself has structural rigidity, can withstand loads when closed, and is dustproof and waterproof.
Two common application scenarios: * * construction machinery/special vehicles * *, * * ship engine compartment * * (ordinary car engine covers are generally one-way flip up, rarely called folding)
structural composition
1. Hard cover plate: divided into multiple independent rigid plates, with no deformation of a single plate;
2. hinge components: hinged between sections to achieve folding and stacking;
3. Drive mechanism: manual strut/hydraulic cylinder/electric push rod;
4. Locking+sealing: mechanical lock buckle, rubber sealing strip, waterproof and dustproof;
5. Limit and safety devices: anti fall insurance, travel limit.
Advantage
-Strong rigidity, impact resistance, trampling resistance, sun aging resistance, far superior to soft canopies;
-Folding storage, no need for large radius flipping space after opening, suitable for narrow layout;
-Good sealing, rainproof, dust-proof, and oil splash proof;
-The surface can be coated with anti slip and anti-corrosion coatings.
shortcoming
-There are many hinges and hydraulic components, with complex structures and high costs;
-High self weight; The hinges, pins, and sealing strips are vulnerable parts that require regular maintenance;
-Folding storage still requires reserved stacking space.
Typical applicable equipment
Excavators, loaders, generator sets, mining special vehicles, ship engine rooms, yacht engine rooms, large air compressor power cabins.
Different from a regular flip up hood
-Ordinary car engine hood: * * single rigid plate, one-way upward opening, no segmented folding * *;
-Hard folding hatch cover: * * Multi segment splicing, folding and stacking * *, suitable for scenarios with large openings and limited space.